(1/3) 002-01 / 20101021 / e533_mlp2012.fm ? all specifications are subject to change without notice. smd inductors(coils) for power line(multilayer, magnetic shielded) mlp series mlp2012 with its internal structure optimized, the mlp2012 type has achieved dc superimposition characteristics that are comparable to those of the existing mlp2520 type. in addition, because low-loss materials are used, the core loss of the coil can be minimized within a wide frequency range. mlp2012's choke coils are therefore best suited to several mhz- drive switching power supplies, the use of which is especially prominent in mobile devices. features mlp2012 has dc super imposition characteristics that are comparable to that of the existing mlp2520 type. optimized ferrite materials enable the reduction of losses. magnetically shielded configuration allowing for high-density mounting. the products contain no lead and also support lead-free soldering. it is a product conforming to rohs directive. applications cellular phones, dscs, dvcs, hdds, etc. specifications recommended soldering condition reflow soldering product identification (1) series name (2) dimensions l w (3) product characteristics classification code (4) inductance value (5) management number (6) packaging style packaging style and quantities handling and precautions before soldering, be sure to preheat components. the preheat- ing temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150c. after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. the inductance value may change due to magnetic saturation if the current exceeds the rated maximum. do not expose the inductors to stray magnetic fields. avoid static electricity discharge during handling. when hand soldering, apply the soldering iron to the printed cir- cuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. conformity to rohs directive operating temperature range ?40 to +125c [including self-temperature rise] storage temperature range ?40 to +85c natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230?c 250 to 260?c 180?c 150?c time(s) mlp 2012 s 2r2 m t (1) (2) (3) (4) (5) (6) 2012 2.0 1.25mm sstd 2r2 2.2 h tt=0.5mm m t=0.85mm t taping [reel] packaging style quantity taping 4000 pieces/reel please contact our sales office when your application are considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/3) 002-01 / 20101021 / e533_mlp2012.fm all specifications are subject to change without notice. shapes and dimensions/recommended pc board pattern electrical characteristics typical electrical characteristics inductance vs. frequency characteristics t=1.0mm max. t=0.55mm max. inductance change vs. dc superposition characteristics t=1.0mm max. t=0.55mm max. classification part no. inductance (h) inductance tolerance test frequency (mhz) dc resistance ( ? )30% rated current (ma) thickness (mm)max. std mlp2012sr47mt 0.47 20% 2 0.09 1200 1 mlp2012s1r0mt 1.0 20% 2 0.16 1000 1 mlp2012s1r5mt 1.5 20% 2 0.16 1000 1 MLP2012S2R2MT 2.2 20% 2 0.23 800 1 mlp2012s3r3mt 3.3 20% 2 0.19 900 1 mlp2012s4r7mt 4.7 20% 2 0.26 700 1 low profile mlp2012sr47tt 0.47 20% 6 0.13 1200 0.55 mlp2012sr82tt 0.82 20% 6 0.13 1200 0.55 mlp2012s1r0tt 1.0 20% 2 0.30 800 0.55 mlp2012s1r5tt 1.5 20% 2 0.35 700 0.55 mlp2012s2r2tt 2.2 20% 2 0.43 600 0.55 weight ( mg ) 7 10 t 0.5 0.05 0.85 0.15 0.5 0.3 1.25 0.2 t 2.0 0.2 1 0.8 0.8 1.2 dimensions in mm 0.1 0 7.0 6.0 5.0 3.0 2.0 1.0 4.0 1 10 100 frequency ( mhz ) inductance ( h ) 2.2 h 0.47 h 1.0 h 1.5 h 3.3 h 4.7 h 3.0 2.5 2.0 1.0 1.5 0.5 0 0.1 1 10 100 frequency ( mhz ) inductance ( h ) 1.5 h 0.82 h 1.0 h 0.47 h 2.2 h 6.0 5.0 4.0 3.0 2.0 1.0 0 0 500 1000 1500 250 750 1250 dc current ( ma ) inductance ( h ) 2.2 h 0.47 h 1.0 h 1.5 h 3.3 h 4.7 h 0 250 500 750 1000 1250 dc current ( ma ) 2.5 2.0 1.5 1.0 0.5 0 inductance ( h ) 1.5 h 0.82 h 1.0 h 0.47 h 2.2 h
(3/3) 002-01 / 20101021 / e533_mlp2012.fm all specifications are subject to change without notice. packaging styles reel dimensions tape dimensions 1.0 ?180 2.0 2.0 0.5 ?13 0.2 ?21 0.8 ?60min. 14.4max. dimensions in mm 8.4 +2.0 ?0.0 160min. taping 200min. 300min. drawing direction dimensions in mm 8.0 0.3 3.5 0.05 1.75 0.1 a x. 4.0 0.1 4.0 0.1 2.0 0.05 1.5 +0.1 ?0.0 sprocket hole cavity 2.3 0.2 1.5 0.2
|
